Skew Rotator Infinity

FOR ALL BEVELS ON PLASMA CONTOUR CUTS

  • Skew Rotator Infinity.jpg

The Skew Rotator Infinity continuous rotation is capable of accurately cutting bevel profiles (non-vertical) on nearly any contour. When the machine is programmed to cut at a bevel angle, the current and stand-off height is controlled by the same NC part program on the Global Control Plus.

The system is used to create bevels for weld-preparation surfaces or for active edges as used on earth engagement tools. Bevel and Land edge configurations can be created via multiple passes.

The bevel angle is automatically set using a combination of A-axis and C-axis interpolation by the CNC. The C-axis may be programmed as a positioning axis or a coordinated motion in conjunction with the X/Y linear axis. When operated along with X/Y motion, the C-axis will maintain the bevel position tangential to the direction of travel.

KEY FEATURES:

  • AC drives for high performance.

  • Programmable arc current, arc voltage, and bevel angle.

  • Infinite C-axis rotation at a rate of 75 RPM, reduces cut cycle and programming time.

  • Quick torch focal point adjustment for easy consumable changeover.

  • Lateral and vertical torch "decoupler" collision detection to prevent torch damage in event of a collision.

  • Automatic torch height control by analog arc voltage with an accuracy of +- 0,15 mm so part accuracy is maintained during bevel cutting.

  • Resultant piece part bevel angles of +45 degrees through -45 degrees

  • The most successful plasma bevel cutting head ever

  • Compound Skew Axis System for high flexibility and productivity

  • No cumbersome arc segments to risk collision or inhibit the cut

  • Unlimited C Axis rotation


arrow_red.gif 联系方式

梅塞尔切割焊接(中国)有限公司

江苏省昆山市南浜路528号

邮政编码:215300
电话:0512-57314949
传真:0512-57312269
邮箱:messer@messer-cs.cn